Sand – with flip description on each

Yellow Mix Sand
Yellow mix sand is suitable for brick & block laying. Also suitable under pools as a base.

White Bush Sand

White Bush sand is used to achieve a white /light mortar colour when brick & block laying.

Sydney Sand

Sydney sand is a fine washed sand suitable for rendering, tiling, concreting and for sand pits.

Newcastle Sand

Newcastle Sand is a fine, sharp sand used for cement rendering.

River Sand

River sand is a coarse grain, cleaned sand that is a primary ingredient used when making concrete.

Fill sand

Fill sand is recycled site sand typically used under concrete slabs or as a bedding sand around pipes or conduit in trenches.

Blue Metal 10mm

Blue Metal is a construction gravel screened to a consistent size of 10mm, that is ideal for around drains, covering agg pipes or behind walls to assist with water flow and drainage.

Blue Metal 20mm

Blue Metal is a construction gravel screened to a consistent size of 20mm, that is ideal for around drains, covering agg pipes or behind walls to assist with water flow and drainage.

Recycled Aggregate 10mm

Recycled Aggregate contains deposits of mainly, brick, rock, tiles and demolition concrete, crushed and screened to a nominal size of 10mm.

Recycled Aggregate 20mm

Recycled Aggregate contains deposits of mainly, brick, rock, tiles and demolition concrete, crushed and screened to a nominal size of 20mm.

Sand and Gravel Mix

Sand & Gravel Mix is a blend of Blue Metal 10mm and Sydney Sand that can be mixed with cement to make concrete and core fill for retaining wall blocks.

Recycled Metal dust

Recycled metal dust can be used for trench fill, back-fill behind retaining walls, as well as to compact beneath concrete slabs, driveways, or pavers.

Blue metal dust

Blue metal dust is a highly versatile, easy to spread material that compacts down well when wet, making it ideal for use as underlay for pavers, beneath footpaths, driveways or synthetic grass.

Road base

DGB (Densely Graded Base) Road base is 20mm minus product that is RMS 3051 certified.

Cold Mix

The Cold Mix is a durable, long-term fix for pothole and patch repairs. Easy to place, no harmful solvents and long shelf life. Our Cold Mix Asphalt is a cost effective road & pavement repair solution

Builders cement is specifically produced for use in areas such as brickwork and blockwork masonry, construction mortars, solid cement rendering, bedding and pointing of roof tiles etc. Strength at an early age may be slightly lower than GP cements but with appropriate curing, there are advantages in higher later age strengths.

Off White Cement is combined with selected sands, aggregates and oxides to provide a wide range of attractive architectural finishes in brick and blockwork mortar, rendering, exposed aggregate pavements, panels and terrazzo.

Concrete Mix is a proportioned blend of dry aggregate, graded sands and cement suitable for all general-purpose concrete applications where a quality concrete is required.

Sand and Cement is a proportioned mix of selected graded sand and cement binders designed for the builder and home handy person. This product can be used for all kinds of patching, bedding and landscaping work.

Quick Set Concrete Mix is a proportioned blend of dry aggregate, graded sands, cement and set accelerating additives to give a concrete mix suitable for all general concreting applications where fast setting characteristics are required.

Quick Set Sand and Cement is a proportioned mix of graded sand, cement binders and additives designed for instant repair applications. The additives accelerate the setting time allowing it to set in approximately 15 minutes and is trafficable in one hour under normal conditions.

Brickies Mortar is a pre-blended trade quality mortar mix specifically designed for both the professional bricklayer and the home handyperson. It is suitable for all brick and blockwork projects.

HS Concrete 50MPa* Mix is a high strength 50MPa* mix containing quality aggregate, sands and cement. It is suitable for concreting applications where higher strength is required.

CROSflow 830 Commercial Leveller is a Commercial Grade cementitious self-levelling underlayment with exceptional flow and adhesion properties. CROSflow 830 Commercial Leveller is suitable for internal applications where a thickness between feather edge and 50mm is required.

CROSfill 510 is a general purpose cementitious (Class A) grout with shrinkage compensation in the plastic stage. It is suitable for most void filling grouting applications where it is essential to compensate initial shrinkage, including grouting column bases, machine base plates, anchor bolts, core holes, hollow block walls, and general concrete repair work.

Crosbe Pocket Patch is a dry pack mortar with excellent cohesion and shrink resistant properties.

Euromix R ender is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high-quality sponge finish is required.

Euromix Cream Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high-quality sponge finish is required

Euromix Skim Coat is designed to be used as a finishing coat over base render or other finished surfaces.

Euromix FP Render is a ready-to-use dry mix, full polymer, cement based render formulated for application over sheet and panel substrates, like, autoclaved aerated concrete (AAC),expanded polystyrene (EPS), fibre cement (FC) and plaster based materials.

Euromix LWHB (Light Weight, High Build) Render is a lightweight dry mix, full polymer, cement-based render formulated for use where a high build finish is required.

Euromix NPS Keycoat Render is a dry mix, full polymer, cement based render formulated for application over non porous sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS), fibre cement (FC) and plaster based materials.

Euromix AAC Adhesive is specially formulated for bonding aerated autoclaved concrete (AAC) lightweight panels and blocks.

Euromix™ Bond is an acrylic polymer bonding agent formulated to enhance the adhesion strength, moisture resistance and setting characteristics of Euromix™ Render.

• 50mm x 2.4m
• 75mm x 2.4m
• 100mm x 2.4m
• 125mm x 2.4m
• 150mm x 2.4m

• 75mm x 25m
• 100mm x 25m
• 150mm x 25m
• 200mm x 25m
• 250mm x 25m
• 300mm x 25m

• 100mm x 25m
• 150mm x 25m

• 110mm x 30m
• 150mm x 30m
• 230mm x 30m
• 300mm x 30m
• 350mm x 30m
• 380mm x 30m

• 110mm x 30m
• 150mm x 30m
• 230mm x 30m
• 300mm x 30m
• 350mm x 30m
• 380mm x 30m
• 450mm x 30m

Malthoid is a tough and flexible bitumen coated felt used for the prevention of rising damp in brick/block walls. Available in 110mm, 230mm and 300m in 20m lengths.

Available in 350mm and 450mm widths, that are 3 metres long and weigh 20kg each

• 700mm
• 800mm
• 900mm
• 1000mm
• 1100mm
• 1200mm

• 900mm
• 12000mm
• 1500mm
• 1800mm
• 2100mm
• 2400mm
• 2700mm

• 1800mm
• 2100mm
• 2400mm
• 2700mm
• 3000mm
• 3300mm
• 3600mm
• 4000mm

• 900mm
• 12000mm
• 1500mm
• 1800mm
• 2100mm
• 2400mm

• 1800mm
• 2100mm
• 2400mm
• 2700mm
• 3000mm
• 3300mm
• 3600mm

• 200x6(h)/200x6(v) - 1800mm, 2100mm
• 200x6(h)/200x8(v) - 2400mm-3300mm (at every 300mm interval)
• 200x6(h)/200x10(v) - 3600mm-5700mm (at every 300mm interval)

• Please give us a call to see what we have in stock.

• 900mm
• 1200mm
• 1500mm
• 1800mm
• 2100mm
• 2400mm
• 2700mm
• 3000mm
• 3600mm

• Slip Joint 3mx110mm Greased
• Slip Joint 3mx150mm Greased
• Slip Joint 3mx230mm Greased
• Slip Joint 3mx270mm Flat Greased

• Slip Joint 3mx270mm V Cavity Greased

Galvanised Expansion Ties are a revolutionary tie that are used to create accurate masonry expansion gaps every time. They provide a control joint of between 10-20mm.

Stubby Ties are a galvanised ‘Face Fixing Veneer Tie’, that are used to fix a timber frame to brickwork. Stubby Ties are sold in a box of 150.

Twisted Veneer Ties are a galvanised ‘Side Fixing Veneer Tie’, that are used to fix a timber frame to brickwork. Twisted Veneer Ties are sold in a box of 150

Wall ties act as a reinforcement for brick and block walls when embedded in cement mortar. They act as connections and permit in-plane movement to accommodate differential movements in built-up brick/block walls. Sold in a box of 500 or individually.

Wall ties act as a reinforcement for brick and block walls when embedded in cement mortar. They act as connections and permit in-plane movement to accommodate differential movements in built-up brick/block walls.

Plastic Bar chairs reinforce, and support reo bar and mesh used in concreting applications. Available in 25/40, 50/65 and 75/90 (in Bags of 100)

Available in 12mm and 16mm sizes in 6m lengths, Reinforced Steel Rods are a light weight and durable product that are used to reinforce concrete.

Long narrow sheets of concrete reinforcing mesh
Ideal for trenches, paths, or other narrow spaces
Common uses include rock walls, brick walls and house footings. Available in 12mm – 6.0m x 0.2mm, 3 Bar & 12mm – 6.0m x 0.3mm, 4 Bar

Concrete ‘Ute’ Mesh is a reinforced steel product that is cut into a conveniently sized 4 x 2 metre sheet Ute Mesh is used to reinforce concrete slabs. Available in F62, F72 & F82 Thickness,

Ag-Pipe is a flexible, corrugated drainage pipe used for subsoil drainage applications. It helps overcome problems such as salinity, high rainfall, high water tables and hillside soaks. Lawns, paths, houses etc. Ag-Pipe is available in these sizes:
• 65mm x 10 Metre Roll
• 65mm x 20 Metre Roll

Ag-Pipe is a flexible, corrugated drainage pipe used for subsoil drainage applications. The sock is a geotextile filter sock that prevents silt from entering the Ag-Pipe and clogging your drainage system.

This joiner is used when it is necessary to join an Ag-Pipe at a ’T- junction’. These are available in 65mm and 100mm sizes.

Geotextile has the ability to separate, filter, reinforce, protect or drain, for use in civil construction, gardening and landscaping. It is available in the following sizes:
1.2M x 10M, Grey
1M x 50M, Grey
2M x 50M, Grey

Silt Fencing is designed to block sediments from travelling across exposed soil and through its woven fibres. Despite blocking sediments, Silt Fencing still allows water to flow through.

The Silt Bag is designed to effectively manage sediment and control erosion on construction sites. Bankstown Sand & Cement sell these empty or filled with sand or blue metal. Ideal for erosion control, sediment management, and environmental protection during construction projects.